Phosphorus determination in plant materials and foods is important. For accessible inorganic P assessment, solid-liquid extraction (SLE) is required. In this work, a flow-based analytical procedure employing zones penetration approach was developed aiming at the soluble inorganic phosphorus (PI) determination in plants and foods. The analyte was quantified by the spectrophotometric molybdenum blue method. Linear response was observed between 2.0 and 30 mg L-1 PI, and detection limit was estimated at 0.50 mg L-1 PI (99.7% confidence level, n = 20). Determination rate was estimated at 20 h-1 using in-line extraction with 20 mg of sample. Precise timing of the flow system allowed the use of incomplete SLE for the first time prior to PI determination. The online extraction was carried out for 60 s, leading to an extraction efficiency of 65 ± 3% in comparison to batch quantitative extraction. The results obtained by the proposed procedure were in agreement with those obtained with batch extractions (95% confidence level).

Formaldehyde is a carcinogenic compound that was employed as fungicide in the past. Despite its disuse, some foods such as mushrooms naturally produce formaldehyde, showing the importance of its determination. In this work, a mechanized flow system based on solenoid valves is proposed for spectrophotometric formaldehyde determination in mushrooms. The analyte was extracted from fresh and dried mushrooms samples by steam distillation with deionized water in the presence of phosphoric acid. The determination was based on the reaction between formaldehyde and acetylacetone in presence of ammonium acetate (Hantzsch reaction), leading to the formation of 3,5-diacetyl-1,4-dihydrolutidine (DDL, λmax = 412 nm). Linear response from 0.2 to 7.0 mg L-1 was achieved, with detection limit estimated at 0.02 mg L-1 (99.7% confidence level). Coefficient of variation and sample throughput were 1.1% (n = 15) and 17 h-1, respectively. Per determination, 11 mg of acetylacetone and 30 mg of ammonium acetate were consumed, generating 4.2 mL of waste. The procedure was applied to formaldehyde determination in fresh and dried shiitake, and fresh shimeji, and the results agreed with those attained by reference method at the 95% confidence level.

Um procedimento analítico em sistema de análises em fluxo com multicomutação é proposto para a determinação de captopril e construção de curvas de dissolução de medicamentos. O método é baseado na reação do fármaco com Cu(II), com posterior complexação de Cu(I) com 4,4'-dicarboxi-2,2'-biquinolina (BQA) e detecção espectrofotométrica. Foi observada resposta linear entre 25 e 300 µmol L-1 captopril, com limite de detecção de 7 µmol L-1 (99,7% de confiança). O coeficiente de variação (n = 20) e a frequência de amostragem foram 2,2% e 47 determinações por hora, respectivamente, com consumo de 290 µg de BQA e geração de 3,6 mL de resíduo por determinação. Os resultados para 7 amostras de preparações farmacêuticas concordaram com os obtidos pelo procedimento volumétrico de referência com 95% de confiança. Perfis de dissolução obtidos com um aparato construído no laboratório foram concordantes com os relatados na literatura, com coeficiente de variação de 1,8% para três replicatas do produto de referência

A flow-based analytical procedure exploiting multicommutation is proposed for captopril determination and the construction of dissolution curves. The procedure is based on the redox reaction between Cu(II) and the drug with the subsequent complexation of Cu(I) with 4,4'-dicarboxy-2,2'-bichinoline (BCA) and spectrophotometric detection. A linear response was observed between 25 and 300 µmol L-1 captopril and the detection limit was estimated as 7 µmol L-1 (99.7% confidence level). The coefficient of variation (n = 20) and sampling rate were 2.2% and 47 determinations per hour, respectively, consuming 290 µg of BCA and generating 3.6 mL of waste per determination. The results for seven pharmaceutical samples agreed with those obtained by the reference volumetric procedure at the 95% confidence level. The dissolution profiles attained with a lab-made dissolution apparatus agreed with those reported in the literature, with a coefficient of variation of 1.8% for three replicates of the reference product